![]() ![]() Unlike a tie rod storefront door, which can take alot of damage and still not fall apart. If the door gets hit hard enough or slammed, the corner welds often break. If you are in the fabrication industry, faulty welds result in broken products. This however, is not as superior to the tie rod assembly construction, since welded doors cannot be resized in field, tightened or re-adjusted, and is only as strong as the weld bead applied. Other aluminum storefront door models do not use the tie rod assembly design, but instead welds the stiles and rails together at the corner known as welded corner construction. Tie Rod Assembly Vs Welded Corner ConstructionHeavy duty aluminum storefront door models typically use a tie rod assembly to hold the stiles and rails together. Offset pivots are most commonly used on storefront doors, however ball bearing hinges can be used as well. A commercial grade door closer is also used on storefront doors, to safely control the closing speed of the door. Since the majority of storefront doors are used as exterior entry doors, a bottom brush sweep and threshold is used to keep debris out of the building. Typically the exterior side of the storefront door uses a mortise keyed lock cylinder, and on the interior side of the door is a thumbturn mortise lock. A laminated deadlock is used as the main locking assembly for a storefront door. An aluminum storefront door is made up a lock stile, pivot/hinge stile, top rail, bottom rail, and glass that sits at the center of the door. In this article we explain what a storefront door is.Īnatomy Of A Storefront DoorA storefront door is typically constructed from 1/8" thick aluminum extrusions. What Is A Storefront Door?A storefront door is a type of commercial aluminum glass door commonly used in grocery stores, gas stations, and other retail stores. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |